Dishwasher displays error code i60 / i61 / i69 / i6C

Issue

• My dishwasher is showing error codes and not heating or drying
• Dishwasher displays error codes i60 / i61 / i69 / i6C
• The lights associated with the MY TIME selection bar flash intermittently six times

Applies to

• Integrated dishwasher
• Freestanding dishwasher

Resolution

What does error code i60, i61 or i69 mean?

Error codes in the i60 group indicate a problem with the water temperature in the appliance. This may mean:

• the temperature of the water supplied to the dishwasher being too high,
• temperature sensor fault,
• a problem with the heating system.

How should I respond to i60 / i61 / i69 errors?

1. Make sure the water inlet temperature does not exceed 60°C at the connection point, as this will adversely affect the enzymes in the detergent and may result in poor washing performance.

2. Reset your appliance:

• Remove the plug for the dishwasher
• Check your dishwasher filter and sump (see below) for signs of foam, suds and debris

• Make sure you clean all the filters
• Clear any foam/suds from the sump area
• Plug it back in. Turn on the dishwasher, select a suitable cycle and start it.
• If the cycle starts and operates normally, the problem has been resolved.

If none of the above steps resolve the issue, we recommend booking a service visit with an authorised technician.

Book a Service Visit

Whether your appliance is in or out of warranty, we're here to guide you to the right repair solution.

A professional inspection will help identify and fix any internal faults safely and efficiently.

Book a repair online