Tumble dryer displays error message C6
Resolution
Issue:
- Tumble dryer displays error message C6
Applies to:
- tumble dryer
Resolution:
1. If the tumble dryer displays error code C6, there is a problem with the moisture sensor.
The cycle takes longer than normal, more than 4.5 hours.
- Check if the machine is connected to an grounded socket.
- If not, there is a problem with the moisture measurement, which can be repaired by an Authorized Service Center.
2. To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- How to change the dryer door opening directions?
- Tumble dryer emits a louder noise during wool cycle
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Drying Temperature in Heat Pump Tumble Dryer
- Heat pump tumble dryer clothes do not seem hot enough and taking too long to finish (video)
- Tumble dryer does not start / does not work
- Tumble dryer stops after a few minutes of the cycle
- Start - Pause LED flashes on tumble dryer
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Cleaning tumble dryer filters and condenser