Tumble dryer displays error message EHO, EH0
Issue
- Tumble dryer displays error message EHO, EH0 - it indicates a problem with the power supply.
Applies to
- Condenser dryer
- Heat pump dryer
Resolution
1. Check the power supply by plugging a different product into the same socket and see whether that works.
If the other product also does not work, the problem is probably with the wiring fault.
Warning: Never use an extension cable to connect appliances. This can cause a short-circuit or fire hazard.
Important: Contact your local electrician for advice and guidance on fixing wiring problems.
2. Reset the appliance.
Remove the plug from the socket, wait 30 seconds and then plug it in again (The same result may be achieved by using the safety switch).
After plugging in the appliance, switch it on and select a program.
Still need help? Get expert support
If the issue continues, a professional technician can help diagnose and fix the problem.
No matter if your appliance is in warranty, out of warranty, or covered by an appliance protection plan - we’ll guide you to the right service.
Cause
- Error code EHO (EH0) or any code beginning with EH..(i.e. EH1, EH2) indicate a possible problem with the power supply, such as too low/too high voltage, unstable power supply
Was this article helpful?
Related Articles
- Tumble Dryer Has No Power or Does Not Start
- Tumble dryer displays error message "Err"
- Tumble dryer damages clothes
- The handle for opening the tumble dryer is broken
- Tumble dryer is leaking
- Tumble dryer emits unpleasant smells
- Tumble dryer not drying, not drying properly, too long drying
- How to change the dryer door opening directions?
- Tumble Dryer displays error code E50 - Causes and Solutions
- Tumble dryer's drying results are poor and laundry is damp after drying
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Tumble Dryer Has No Power or Does Not Start
- Tumble dryer displays error message "Err"
- Tumble dryer damages clothes
- The handle for opening the tumble dryer is broken
- Tumble dryer is leaking
- Tumble dryer emits unpleasant smells
- Tumble dryer not drying, not drying properly, too long drying
- How to change the dryer door opening directions?
- Tumble Dryer displays error code E50 - Causes and Solutions
- Tumble dryer's drying results are poor and laundry is damp after drying