The steam cooking does not work
Resolution
Issue:
- The steam cooking does not work
- The baking or cooking result with a steam function is poor
Applies to:
- integrated steam oven
Resolution:
1. Fill the water tank.
2. Check the steam inlet opening.
Remove the lime that obstructs the hole.
3. For best results always start a steam function in the cold oven.
If the oven has been used before, allow it to cool to room temperature. If necessary, leave the door open.
3. Contact an Authorized Service Center.
If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- How to remove oven shelf supports for cleaning
- Zanussi oven displays LOC, SAFE or padlock symbol
- Oven clock time changes
- Oven clock flashes or time displaying 00:00 / 12:00 - Zanussi
- Oven does not heat up
- After a power cut how to set the ovens time - Zanussi
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- How to clean a Zanussi single oven manually, removing oven door and glass
- How to set an oven timer - Zanussi
- The door of the oven does not close properly
Related Articles
- How to remove oven shelf supports for cleaning
- Zanussi oven displays LOC, SAFE or padlock symbol
- Oven clock time changes
- Oven clock flashes or time displaying 00:00 / 12:00 - Zanussi
- Oven does not heat up
- After a power cut how to set the ovens time - Zanussi
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- How to clean a Zanussi single oven manually, removing oven door and glass
- How to set an oven timer - Zanussi
- The door of the oven does not close properly