The oven door cannot be opened after pyrolytic cleaning
Issue
- After the pyrolytic cleaning, the oven door can no longer be opened
- The door remains locked after self-cleaning
- The oven door cannot be opened
Applies to
- oven with pyrolytic self- cleaning function
Resolution
During the pyrolytic cleaning, interior temperature reaches up to approx. 500°C, therefore, for safety reasons, the door is automatically locked.
Do not try to open the door until pyrolytic cleaning is complete.
Depending on the model, the padlock symbol is shown on the display
At the end of the cleaning program, the door lock is automatically released when the oven has cooled down. The symbol above goes out.
Further information can be found in the oven user manual
If the oven door remains locked after the appliance has cooled down, turn off the appliance from the mains supply, wait for 10 minutes and then switch back on at the mains supply and restart your appliance.
If the issue persists, please contact our Customer Care Team.
Was this article helpful?
Related Articles
- Oven cooling fan runs all the time
- Oven makes noise when I use the true Fan cooking function
- Oven displays error code with prefix F
- Gas grilling - Open door
- The time is not shown on the display when the oven is turned off
- Zanussi Oven and Cooker Functions/Symbols
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- The 'END TIME' and 'TIME DELAY' cooking functions are not available, even though they are mentioned in the user manual
- Zanussi oven displays LOC, SAFE or padlock symbol
- Water gets on the kitchen floor when using the oven