Oven displays code F102
Issue
- oven shows error code F102 when you turn the appliance on
Applies to
- Ovens
- cookers
Resolution
1. The door lock may be defective, fully close the door.
2. Deactivate the oven by isolating it for a few minutes and plug it back in, alternatively, check the house fuse or the safety switch in the fuse box and activate it again if possible or consult a qualified electrician
3. If the display shows "F102" again, contact the Customer Care Department to arrange a service visit.
Cause
- door not fully closed
- problem with the electronics
Was this article helpful?
Related Articles
- What is / how to use AirFry tray and function in a Zanussi oven?
- How to clean the Zanussi oven with pyrolytic function?
- Oven does not heat up
- After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi
- How to remove oven shelf supports for cleaning
- Zanussi Oven and Cooker Functions/Symbols
- How to clean a Zanussi single oven manually, removing oven door and glass
- The time is not shown on the display when the oven is turned off
- The oven door cannot be opened after pyrolytic cleaning
- The 'END TIME' and 'TIME DELAY' cooking functions are not available, even though they are mentioned in the user manual