After a short power failure, Demo appears in the display and my oven will not heat up

Q: After a short power failure, Demo appears in the display and my oven will not heat up

To deactivate Demo Mode on your Zanussi oven Unknown block type "externalImage", specify a component for it in the `components.types` option To deactivate the demo mode for the above display: 1.Turn off the oven Unknown block type "externalImage", specify a component for it in the `components.types` option 3.The word ‘Demo’ and number ‘1’ will flash Unknown block type "externalImage", specify a component for it in the `components.types` option Unknown block type "externalImage", specify a component for it in the `components.types` option To deactivate Demo mode on the above display While the oven is switched off 1. Press and hold the “+” button until the first digit blinks Unknown block type "externalImage", specify a component for it in the `components.types` option If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.

Question

After a short power failure, Demo appears in the display and my oven will not heat up

Accepted Answer

To deactivate Demo Mode on your Zanussi oven

To deactivate the demo mode for the above display:

1.Turn off the oven

3.The word ‘Demo’ and number ‘1’ will flash

To deactivate Demo mode on the above display

While the oven is switched off

1. Press and hold the “+” button until the first digit blinks

If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.

After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi

Issue

Applies to

Resolution

Was this article helpful?