Oven shows – - – C on the display
Issue
- Oven shows "--- C" on the display
Applies to
- integrated oven
- freestanding cooker
Resolution
1. Set both the function selector and temperature knob to the “0” position and turn the power to the appliance off for a few minutes.
2. If "--- C" continues to appear on the display after the power is on again, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- What is / how to use AirFry tray and function in a Zanussi oven?
- How to clean the Zanussi oven with pyrolytic function?
- Oven does not heat up
- After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi
- How to remove oven shelf supports for cleaning
- Zanussi Oven and Cooker Functions/Symbols
- How to clean a Zanussi single oven manually, removing oven door and glass
- The time is not shown on the display when the oven is turned off
- The oven door cannot be opened after pyrolytic cleaning
- The 'END TIME' and 'TIME DELAY' cooking functions are not available, even though they are mentioned in the user manual