I can hear a constant beep noise / my oven's display shows 400
Resolution
Issue:
- I can hear a constant beep noise and my oven's display shows "400" after activation. it indicates that the appliance is connected to 400V.
Applies to:
- integrated oven
- freestanding cooker
Resolution:
1. Check if the appliance is correctly connected to the electrical supply.
Ensure a correct installation by calling an authorized installer.
2. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- After a power cut how to set the ovens time - Zanussi
- Zanussi oven displays LOC, SAFE or padlock symbol
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
- Oven clock flashes or time displaying 00:00 / 12:00 - Zanussi
- How to remove a built-in oven door (video)
- The oven door cannot be opened after pyrolytic cleaning
- How to Proof Dough in an Oven (Without a Proofing Setting)
- Oven light does not work
- Oven cooling fan runs all the time
- After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi
Related Articles
- After a power cut how to set the ovens time - Zanussi
- Zanussi oven displays LOC, SAFE or padlock symbol
- Oven Trips Fuses or Circuit Breaker – Causes & How to Fix
- Oven clock flashes or time displaying 00:00 / 12:00 - Zanussi
- How to remove a built-in oven door (video)
- The oven door cannot be opened after pyrolytic cleaning
- How to Proof Dough in an Oven (Without a Proofing Setting)
- Oven light does not work
- Oven cooling fan runs all the time
- After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi