Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- Cleaning the drain holes in the fridge
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Ventilation on Integrated and Freestanding Fridge Freezer
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Fridge Freezer Smells Bad? Causes & How to Remove Unpleasant Odours
- How to use “power cool”, and “power freeze” function?
- Temperature in the fridge-freezer is too low
- Fridge freezer shows F8 on the display
- Fridge freezer shows code E11
- Serial number/Model number/Product number (PNC) on my fridge freezer
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.