An “0” or "square" is flashing on the display of my fridge-freezer
Issue
- An “0” or "square" symbol is flashing on the display
Applies to
- Fridge
- Fridge freezer
- Freezer
Resolution
1. Contact an Authorised Service Centre.
This indicates the problem is within the fridge compartment
This indicates the problem is within the freezer compartment
We recommend requesting a visit by a service engineer.
Cause
- Problem with the temperature sensor of your appliance
Was this article helpful?
Related Articles
- Moisture in the vegetable drawer or under the glass shelf in the fridge
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Food freezing In fridge
- Why Is My Fridge Compressor Running Continuously?
- The front corners and sides of my refrigerator / fridge freezer are warm
- Ice forms on the bottom of my freezer
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Fridge Freezer Smells Bad? Causes & How to Remove Unpleasant Odours
- Easy Door Opening overlay - installation instructions
- Replacing shelves/lamp bulbs/accessories in my Zanussi Fridge / Fridge Freezer
Related Articles
- Moisture in the vegetable drawer or under the glass shelf in the fridge
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Food freezing In fridge
- Why Is My Fridge Compressor Running Continuously?
- The front corners and sides of my refrigerator / fridge freezer are warm
- Ice forms on the bottom of my freezer
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Fridge Freezer Smells Bad? Causes & How to Remove Unpleasant Odours
- Easy Door Opening overlay - installation instructions
- Replacing shelves/lamp bulbs/accessories in my Zanussi Fridge / Fridge Freezer