Fridge freezer shows code E10
Issue
- Fridge freezer displays error code E10
Applies to
- Fridge freezer
Resolution
- Error code E10 is likely to occur after a long term power failure, or when hot food has been left in the fridge
- Set the fridge temperature to a colder value or set Super Cool. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
- Empty the location at the front area of air duct channel holes and avoid putting food close to the sensor
- If this warning continues an authorised technician needs to be contacted
Cause
- The fridge compartment is not cold enough
Was this article helpful?
Related Articles
- Food freezing In fridge
- Why Is My Fridge Compressor Running Continuously?
- How to use “power cool”, and “power freeze” function?
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Serial number/Model number/Product number (PNC) on my fridge freezer
- Temperature in the fridge-freezer is too low
- What Is Holiday Mode on a Fridge Freezer?
- Ventilation on Integrated and Freestanding Fridge Freezer
- Is the temperature inside the fridge freezer the same in every part?
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.