Fridge freezer shows code E08
Issue
- Fridge freezer displays error code E08
Applies to
- Fridge freezer
Resolution
- Error code E08 indicates that the power supply to the appliance has dropped to below 170 V
- This is not an appliance failure, this error helps to prevent damages to the compressor.
- The voltage needs to be increased back to required levels
- If this warning continues an authorised technician needs to be contacted
Cause
- Low Voltage Warning
Was this article helpful?
Related Articles
- My fridge freezer is not working
- Fridge Door Will Not Close
- Ventilation on Integrated and Freestanding Fridge Freezer
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Temperature in the fridge-freezer is too low
- What is the optimal temperature in my Zanussi fridge or freezer?
- Drip tray location on integrated fridge freezer
- An “0” or "square" is flashing on the display of my fridge-freezer
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Ventilation requirements for fridges and freezers
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- My fridge freezer is not working
- Fridge Door Will Not Close
- Ventilation on Integrated and Freestanding Fridge Freezer
- Water Leaking from Fridge or Fridge Freezer – Causes & Solutions
- Temperature in the fridge-freezer is too low
- What is the optimal temperature in my Zanussi fridge or freezer?
- Drip tray location on integrated fridge freezer
- An “0” or "square" is flashing on the display of my fridge-freezer
- Fridge freezer shows an alarm, red warning light, flashing triangle or beeps
- Ventilation requirements for fridges and freezers