Dishwasher door shifts up during a wash cycle
Resolution
Issue:
- Dishwasher door shifts up during a wash cycle
Applies to:
- Integrated dishwasher
- Freestanding dishwasher
Resolution:
1. Contact the installer.
If your integrated dishwasher has been installed recently, the door panel may be too heavy, or the appliance may not have been installed correctly.
2. Check and, if necessary, wash out the spray arms, and clean the filters at the bottom of the unit in accordance with the user manual before using the appliance again.
If the appliance has been installed correctly, the problem may be blocked or clogged spray arms.
3. Contact an Authorized Service Center.
If your dishwasher is not integrated or recently installed, the dishwasher must be inspected and repaired by an engineer.
Was this article helpful?
Related Articles
- How to adjust water hardness level in dishwasher
- Dishwasher shows d: on in display / DEMO mode deactivation
- Dishwasher displays error code i40, i43 or i44
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error code iF0, iFo or iF1
- Dishwasher displays error code i30
- Is it possible to connect the dishwasher to hot water supply?
- Dishwasher door is defective
- Dishwasher detergent dispenser does not close
- Dishwasher does not beep at the end of the cycle
Related Articles
- How to adjust water hardness level in dishwasher
- Dishwasher shows d: on in display / DEMO mode deactivation
- Dishwasher displays error code i40, i43 or i44
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error code iF0, iFo or iF1
- Dishwasher displays error code i30
- Is it possible to connect the dishwasher to hot water supply?
- Dishwasher door is defective
- Dishwasher detergent dispenser does not close
- Dishwasher does not beep at the end of the cycle