Oven displays code F102
Appliance Issue
- oven shows error code F102 when you turn the appliance on
Applies to
- Ovens
- cookers
Resolution
1. The door lock may be defective, fully close the door.
2. Deactivate the oven by isolating it for a few minutes and plug it back in, alternatively, check the house fuse or the safety switch in the fuse box and activate it again if possible or consult a qualified electrician
3. If the display shows "F102" again, contact the Customer Care Department to arrange a service visit.
Cause
- door not fully closed
- problem with the electronics
Was this article helpful?
Related Articles
- The door of the oven does not close properly
- Oven does not heat up
- How to prove the dough in the oven, if it is not equipped with special programme?
- Oven displays error code with prefix F
- The time is not shown on the display when the oven is turned off
- Oven blows / trips fuses
- How to remove oven shelf supports for cleaning
- Zanussi Oven and Cooker Functions/Symbols
- Food burning prevention - Oven
- How to clean a Zanussi single oven manually, removing oven door and glass