How to use the Aqua Clean function on your Oven
Issue
- How to use Aqua Clean on your AEG Oven
Applies to
- Ovens
Resolution
This cleaning procedure uses steam/humidity to help remove remaining fat and food and particles/debris from the interior of the oven enamel-coated cavity.
Step 1 Pour water into the cavity embossment: 200 ml.
Step 2 Use the SteamBake function and set the temperature to 90 °C on TrueFan setting
Step 3 Let the oven work for 30 min.
Step 5 Turn off the oven.
Step 6 Wait until the oven is cold. Wipe out and then dry the oven cavity with a soft cloth.
Was this article helpful?
Related Articles
- What is / how to use AirFry tray and function in a Zanussi oven?
- How to clean the Zanussi oven with pyrolytic function?
- Oven does not heat up
- After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi
- How to remove oven shelf supports for cleaning
- Zanussi Oven and Cooker Functions/Symbols
- How to clean a Zanussi single oven manually, removing oven door and glass
- The time is not shown on the display when the oven is turned off
- The oven door cannot be opened after pyrolytic cleaning
- The 'END TIME' and 'TIME DELAY' cooking functions are not available, even though they are mentioned in the user manual