How to replace the control box (3)

Issue

How to replace the control box

Applies to

• Cooker Hoods

Resolution

Refer always to your product’s user manual safety information before any repair or maintenance operation. https://www.electrolux.com/support/user-manuals/

WARNING! RISK OF ELECTRIC SHOCK

Before any repair or maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

WARNING! RISK OF INJURY

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

WARNING! RISK OF EYE INJURY

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

How to remove the control box

Extract the sliding panel and remove the metal grease filters.
With a screwdriver, work on the side metal wings until the metal cover on the internal frame is unblocked from the sliding panel (Fig. 2)

Remove the 3 screws that are holding up the canopy’s cover and extract it (Fig. 3)

Remove the 2 screws over the sliding panel in a way so that you extract the command unit on the part underneath the carriage itself (Fig.4)

Open the command unit by unscrewing the two side screws, extract the card and replace it with one that has the same characteristics according to the electrical connections (Fig. 5 and 6)

Reset everything and check to see that it is functioning correctly