Dishwasher has poor washing results
Issue
- Food, grease or sauce residue remaining after a cycle
- Overall poor performance of the dishwasher
- Poor dishwashing results, the dishes are not clean after the washing programme
Applies to
- Integrated dishwasher
- Freestanding dishwasher
Resolution
1. Check whether the filters and spray arms a clean and free from blockages.
You can find information on cleaning and maintenance in the user manual. Download the user manual.
How to clean your dishwasher filter
How to clean your dishwasher spray arms
2. Remove all food particles residing on the dishes before loading them into the dishwasher.
3. Wipe obvious soiling from seals and wash the chamber with warm water.
4. Use regularly a specific cleaning product for dishwashers, such as Clean & Care (available on our Webshop).
Follow carefully the instructions on the packaging of the product.
You will find recommended care & maintenance products on our Webshop.
How to use your dishwasher machine care program
5. Ensure items are correctly loaded into dedicated basket positions.
Make sure that the items in the baskets do not touch or cover each other. Only then will the water be able to reach all the dishes
For more information refer to the article "How to load and unload the dishwasher?"
6. Select a program appropriate to the load type and degree of soiling.
For more information refer to your user manual.
7. Use good quality detergent, salt and rinse aid products.
Ensure the appliance has a rinse aid and salt. See the video guides for instructions on how to top these up.
8. Is there water droplets left on the crockery at the end of the wash?
This could indicate the appliance is not heating properly. Refer to the article: Dishwasher is not heating up water.
Still need help? Get expert support
If the issue continues, a professional technician can help diagnose and fix the problem.
No matter if your appliance is in warranty, out of warranty, or covered by an appliance protection plan - we’ll guide you to the right service.
Was this article helpful?
Related Articles
- Integrated built-in dishwasher door stuck closed
- Dishwasher Tablets Do Not Fully Dissolve / Left In the Base
- Dishwasher displays error code I20, C2, F2 or AL6, or beeps twice, not draining
- Dishwasher does not beep at the end of the cycle
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher does not / will not start but the power is on
- Dishwasher installation (Sliding door)
- Dishwasher not cleaning properly
- Dishwasher Has Visible Signs of Damage or Loose Components
- Dishwasher does not switch on, no light on the control panel
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.