Washing machine displays error message E70
Issue
- Washing machine displays error message E70 (or any code beginning with E7*). It generally refers to a temperature sensor problem with the machine.
Applies to
- Washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause
- The Temperature ( NTC ) sensor in your appliance has stopped working or is damaged
Was this article helpful?
Related Articles
- Washing machine’s fluff filter is jammed, cannot be removed
- Washing machine emits humming / pumping noise
- Washing machine stops in the middle of a cycle
- Washing machine does not work / does not react
- Cleaning the washing machine’s rubber seal if it's dirty
- White clothes turn grey after washing in my washing machine / washer dryer
- Washing machine displays "CLE" - drum cleaning reminder
- After cleaning the pump filter, the washing machine hums and does not start washing
- How to clean and maintain your Zanussi washing machine and extend its life
- Washing machine does not spin