Washer - dryer does not switch on after a drying cycle

Issue

Washer-dryer does not switch on after a drying cycle

Applies to

Washer-dryers

Resolution

If the washer-dryer does not switch on after a drying cycle, there is a technical problem with the appliance.

Contact an Authorized Service Center.

To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.

Was this article helpful?

Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
Washer dryer does not take detergents / water remains in the softener compartment
Washer - dryer inlet hose is leaking
Fluff / lint on laundry after removing from washer - dryer
How to switch on the dryer on my Zanussi washer dryer
Drying cycle of washer dryer takes too long, too short or not drying at all
Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
Washer-dryer emits noises and shakes while spinning
Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
Clothes are too creased after washing in the washer dryer

Spare parts & Accessories

Find original spare parts for your appliance in our webshop and have them delivered directly to your door.

To the webshop

Book a repair

Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.