How to switch on the dryer on my Zanussi washer dryer
Issue
- Unable to locate the right programmes to dry my clothes
- How to set up the drying programme on washer dryer
Applies to
- Zanussi Washer Dryers
Resolution
Most Washer Dryers need to have the programme selected before you select the drying programme.
For example, if you are drying Cotton, select 'Cotton' followed by either timed or automatic drying.
Some fascias may be slightly different but the principle will remain the same. If your fascia does not look like this, and you are still struggling please give us feedback or refer to your user manual for guidance.
You can always call or chat with a member of our team for help.
Was this article helpful?
Related Articles
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes
- Washer dryer does not take detergents / water remains in the softener compartment
- How to clean and maintain your Zanussi washer dryer and extend its life
- Washer dryer displays error message E40 or emits 4 beeps / 4 flashes
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Fluff / lint on laundry after removing from washer - dryer
- Washer - dryer does not switch on after a drying cycle
- Handle of the washer - dryer door is faulty
- Clothes are too creased after washing in the washer dryer