Tumble dryer door opens during a cycle
Issue
- Tumble dryer door opens during a cycle
Applies to
- Tumble dryers
Resolution
The tumble dryer may be overloaded. You will find information on maximum loading in the .
- Take some clothes out of the appliance.
- Start the program again.
- If the above tips do not help, contact our customer service
Was this article helpful?
Related Articles
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
- Tumble dryer not drying, not drying properly, too long drying
- Warning light(s) of tumble dryer cannot be switched off
Related Articles
- Tumble dryer’s water tank is empty
- Cleaning tumble dryer filters and condenser
- Tumble Dryer generates scraping/rubbing noise while drum rotating
- Tumble dryer does not start / does not work
- Tumble dryer displays error message E20, C2 or emits 2 beeps / 2 flashes
- Tumble dryer blows fuses / trips RCD circuit breaker
- Clothes are too creased after drying in tumble dryer
- Water leakage from under the dryer
- Tumble dryer not drying, not drying properly, too long drying
- Warning light(s) of tumble dryer cannot be switched off