Tumble dryer displays error message CE / CF
Issue
- Tumble dryer displays error message CE / CF
Applies to
- tumble dryer
Resolution
1. If the tumble dryer displays error code CE or CF, there is a problem with the electronics.
2. To resolve this issue, contact an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Heat pump tumble dryer clothes do not seem hot enough and taking too long to finish (video)
- How to change the dryer door opening directions?
- Drying Temperature in Heat Pump Tumble Dryer
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Clothes are still wet at the end of the drying cycle
- Tumble dryer stops after a few minutes of the cycle
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message E60 and does not heat up
- Water leakage from under the dryer
- Cleaning tumble dryer filters and condenser
Related Articles
- Heat pump tumble dryer clothes do not seem hot enough and taking too long to finish (video)
- How to change the dryer door opening directions?
- Drying Temperature in Heat Pump Tumble Dryer
- Excessive moisture in room, on walls and windows where the tumble dryer is located
- Clothes are still wet at the end of the drying cycle
- Tumble dryer stops after a few minutes of the cycle
- Start - Pause LED flashes on tumble dryer
- Tumble dryer displays error message E60 and does not heat up
- Water leakage from under the dryer
- Cleaning tumble dryer filters and condenser