SenseBoil indicators blink on induction hob
Issue
SenseBoil® indicators blink
SenseBoil® function does not work
Cannot activate the SenseBoil® function
How to use the SenseBoil® function?
Applies to
- induction hobs with SenseBoil® function
Resolution
1. Make sure the surface of the hob is dry.
2. Finish previous cooking activities or choose a free cooking zone without any residual heat.
If all cooking zones are already in use or there is some residual heat on all of them, the hob emits a beep sound, the SenseBoil® indicators blink and the function does not start.
3. Select a cooking zone within 5 seconds of activating the SenseBoil® function.
4. If the above advice does not work, check and change the power limitation settings on the hob.
Refer to the full description available in the user manual supplied with the appliance.
Download the user manual.
Caution: Make sure that the selected power fits the house installation fuse. Technical help is recommended.
Was this article helpful?
Related Articles
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays message L, the hob is locked
- How do I connect my electric ceramic or induction cooker to the power supply?
- Hob displays error message E6 / E641
- Hob display flashes between two figures / stuck on simmer / unable to use all zones at the same time
- Discoloured glass plate / ceramic glass cleaning tips
- What cookware is suitable for cooking zones with induction heating?
- Induction pan types, quality and cooking effectiveness
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- One of the rings on my Gas Cooker/Hob won’t stay alight?
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.