Seal on the washing machine's door is damaged
Issue
- The seal on the washing machine's door is loose, damaged or deformed
- The seal on the washing machine door is twisted and leaking
Applies to
- Front loader washing machine (integrated and freestanding)
Resolution
1. Contact an Authorised Service Center.
If the door seal is loose, damaged or deformed we recommend requesting a visit by a service engineer to replace the seal.
Warning: We recommend not to use the appliance if the door seal is damaged. Using the machine with a damaged door seal may lead to the appliance or property damage.
Cause
1. Damage to the washing machine's door seal can be caused by the following:
- Zips, metal buttons and other metallic objects catching the door seal when loading and unloading the appliance.
- Overloading the machine or catching the laundry between the seal and the door pane when closing the door.
2. Washing fabrics which are heavily soiled with oil, grease or other greasy substances can damage rubber parts of the washing machine.
Prewash such fabrics by hand before loading them into the washing machine.
Was this article helpful?
Related Articles
- Washing machine displays padlock - Zanussi
- Washing machine emits noises and shakes while spinning
- Washing machine displays error message E60
- How do I access the filter on my Zanussi washing machine?
- Washing machine stops in the middle of a cycle
- Washing machine emits buzzing sound during washing
- Washing machine does not take detergents / water remains in the fabric softener compartment
- Washing machine inlet hose is leaking
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine displays error message E10, E11, C1 or emits 1 beep / 1 flash