Oven shows error code F21
Issue
- Oven shows error code F21 on the display
Applies to
- Built-in oven
- Freestanding cooker
Resolution
- Turn the control panel off and on again.
- Contact an Authorised Service Centre.If the above suggestion did not solve the problem, we recommend requesting a visit by a service engineer
Cause
- error code F21 indicates too high starting temperature
Was this article helpful?
Related Articles
- Zanussi Oven and Cooker Functions/Symbols
- How to Proof Dough in an Oven (Without a Proofing Setting)
- How to set a cooker timer (duration) / minute minder
- Oven has visible signs of damage
- Oven cooling fan runs all the time
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- Oven pyrolytic self - cleaning function gives poor results
- How to remove oven shelf supports for cleaning
- How to set an oven timer - Zanussi
- Temperature on the oven's display differs from the measured temperature
Related Articles
- Zanussi Oven and Cooker Functions/Symbols
- How to Proof Dough in an Oven (Without a Proofing Setting)
- How to set a cooker timer (duration) / minute minder
- Oven has visible signs of damage
- Oven cooling fan runs all the time
- Only one oven is working, One oven is not heating (Integrated Double Ovens & Freestanding Cookers)
- Oven pyrolytic self - cleaning function gives poor results
- How to remove oven shelf supports for cleaning
- How to set an oven timer - Zanussi
- Temperature on the oven's display differs from the measured temperature