Light in the drum of the tumble dryer does not work
Resolution
Issue:
- Light in the drum of the tumble dryer does not work
Applies to:
- Tumble dryer
Resolution:
1. If the machine is new, check whether the machine’s specification includes an internal light.
2. If the tumble dryer is on and the light in the drum does not work, contact an Authorized Service Centre.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- Clothes are still wet at the end of the drying cycle
- Cleaning tumble dryer filters and condenser
- Tumble dryer displays error message E50
- Tumble dryer stops after a few minutes of the cycle
- Tumble dryer ends the programme immediately after the start
- Tumble dryer displays error message EHO, EH0
- Condenser Dryer Drain Kit
- Water leakage from under the dryer
- Moisture, condensation, water in tumble dryer
- Tumble dryer displays error code E70