Induction hob displays error code F2
Resolution
Issue:
- Error code F2 appears on display of induction hob
- SenseBoil® function does not work
- Cannot activate the SenseBoil® function
Applies to:
- induction hobs with SenseBoil® function
Resolution:
1. Make sure surface of hob is dry.
2. Do not activate any zone with an empty pot on it.
3. Avoid using the function with liquids other than water.
Cause:
- Error code F2 indicates that the pot is empty or it contains some liquid other than water, e.g. oil.
Was this article helpful?
Related Articles
- Hob displays message L, the hob is locked
- Noises/Buzzing When Using Induction Hob
- Hob displays message F
- Hob displays error message E7
- Only one side of the hob is operating
- How to Find the PNC Number on an Installed Hob
- Hob displays message A
- How To Use BoilAssist Function on a Zanussi Induction Hob
- Hob displays error message E9
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
Related Articles
- Hob displays message L, the hob is locked
- Noises/Buzzing When Using Induction Hob
- Hob displays message F
- Hob displays error message E7
- Only one side of the hob is operating
- How to Find the PNC Number on an Installed Hob
- Hob displays message A
- How To Use BoilAssist Function on a Zanussi Induction Hob
- Hob displays error message E9
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433