Hob displays message H
Issue
- Hob/cooker displays message H. It usually indicates residual heat in the cooking zone
Applies to
- electric hob
- induction hob
Resolution
1. Allow the cooking zone to cool down
Message "H" indicates residual heat in the cooking zone. This is normal and not a malfunction.
 | Residual heat indicator (cooking zone is still hot) |
2. Contact an Authorized Service Center
If the hob is cooled down, it probably indicates there is a problem with the sensor. In this case, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Hob displays message F
- Hob displays error message E7
- Only one side of the hob is operating
- How to Find the PNC Number on an Installed Hob
- Hob displays message A
- How To Use BoilAssist Function on a Zanussi Induction Hob
- Hob displays error message E9
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Touch Control Induction or Ceramic hob beeps and then switches off
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Hob displays message F
- Hob displays error message E7
- Only one side of the hob is operating
- How to Find the PNC Number on an Installed Hob
- Hob displays message A
- How To Use BoilAssist Function on a Zanussi Induction Hob
- Hob displays error message E9
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Touch Control Induction or Ceramic hob beeps and then switches off