Display of washer dryer is blurry
Issue
- Display of washer dryer is blurry
Applies to
- washer-dryer
Resolution
- Looking at the display from the side or above will make it seem unclear.
- Adjusting the brightness and contrast of the display will make it easier to read.
- If the appliance has brightness and contrast controls, refer to the user manual for detailed guidance.
- If the above suggestions do not resolve the problem, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- Washer dryer displays error message E30, C3 or emits 3 beeps
- Washer-dryer displays error message E50, C9 or F9
- Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash
- Handle of the washer - dryer door is faulty
- Washer dryer displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Drying cycle of washer dryer takes too long, too short or not drying at all
- Washer dryer does not take detergents / water remains in the softener compartment
- Washer - dryer inlet hose is leaking
- Fluff / lint on laundry after removing from washer - dryer
- How to switch on the dryer on my Zanussi washer dryer