Dishwasher displays error code iF0, iFo or iF1
Issue
- Dishwasher displays error code iF0, iFo or iF1
Applies to
- Integrated dishwasher
- Freestanding dishwasher
Resolution
First, reset your appliance:
- Remove the plug for the dishwasher
- Check your dishwasher filter and sump (see below) for signs of foam/suds & debris
- Make sure you clean all the filters
- Clear any foam/suds from the sump
- Plug it back in. Turn on the dishwasher, select a suitable cycle and start it.
- If the cycle starts and operates normally, the problem has been resolved.
If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.
Cause
- iF0 or iF1 code indicates water level problem
Was this article helpful?
Related Articles
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher door will not close properly or is crooked
- Dishwasher shows d: on in display / DEMO mode deactivation
- Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle
- Dishwashers has poor washing results
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Water is being filled into the dishwasher even when it is turned off
- Dishwasher displays error code i30
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher Hose Length