Dishwasher displays error code i80
Issue
- My dishwasher door doesn't open when I'm using Auto door / AirDry function
- Dishwasher displays error code i80
Applies to
- All Integrated and Freestanding dishwashers
Resolution
Reset your appliance:
- Remove the plug for the dishwasher
- Check your dishwasher filter and sump ( See below ) for signs of foam/suds & debris
- Make sure you clean all the filters
- Clear any foam/suds from the sump
- Plug it back in. Turn on the dishwasher, select a suitable cycle and start it.
- Make sure you have selected "AirDry", for further instructions refer to the user manual
- If the cycle starts and operates normally, the problem has been resolved.
If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.
Cause
- Auto door / AirDry not functioning correctly
Was this article helpful?
Related Articles
- Dishwasher displays error code i30
- Dishwasher does not switch on, no light on the control panel
- Dishwasher displays error code iF0, iFo or iF1
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher displays error code I20, C2, F2 or AL6, or beeps twice, not draining
- Dishwasher settings reset after each cycle
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher is leaking
- Dishwasher installation (Sliding door)
- How to adjust water hardness level in dishwasher
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.