Compact dishwasher displays error message E4
Issue
- Compact dishwasher displays error message E4
- Compact dishwasher emits acoustic signal for approximately 30 seconds
Applies to
- Integrated compact dishwasher
- Free-standing compact dishwasher
Resolution
E4 error in free-standing compact dishwasher
1. Check the drain system:
- Make sure that the drain hose is correctly connected. Refer to the installation leaflet.
- Make sure that the filters in the appliance are clean.
- Make sure that the kitchen sink drains correctly.
2. Contact an Authorized Service Center.
- Error message E4 in free-standing compact dishwasher indicates too much inlet water and/or a leak.
- We recommend requesting a visit by a service engineer.
Warning: Turn off the dishwasher's water supply to avoid flooding.
E4 error in integrated compact dishwasher
1. Contact an Authorized Service Center.
Error message E4 in integrated compact dishwasher indicates failure of communication between the main PCB with display PCB. We recommend requesting a visit by a service engineer.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Was this article helpful?
Related Articles
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher door will not close properly or is crooked
- Dishwasher shows d: on in display / DEMO mode deactivation
- Dishwasher does not switch on, does not start a cycle, does not automatically open the door at the end of a cycle
- Dishwashers has poor washing results
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Water is being filled into the dishwasher even when it is turned off
- Dishwasher displays error code i30
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher Hose Length