Compact dishwasher displays error message E1, does not fill with water
Issue
- Compact dishwasher displays error message E1
- The appliance does not fill with water
- Compact dishwasher emits an acoustic signal for approximately 30 seconds
Applies to
- Integrated compact dishwasher
- Free-standing compact dishwasher
Resolution
This error code indicates that the tap is not open or water intake is restricted, or water pressure is too low.
1. Make sure that the water tap is open.
2. Make sure that the water tap is not clogged.
3. Make sure that the pressure of the water supply is not too low.
Recommended water pressure is between 0.04-1.0MPa.
For this information, contact your local water authority.
Was this article helpful?
Related Articles
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher is not heating up water
- Dishwasher Tablets Do Not Fully Dissolve / Left In the Base
- Unpleasant odour from the dishwasher
- Dishwasher displays error code i40, i43 or i44
- Dishwasher displays error code iF0, iFo or iF1
- Is it possible to connect the dishwasher to hot water supply?
- The auto-cleaning indicator ("Machine Care") lights up on the dishwasher
- Dishwasher does not / will not start but the power is on
- Dishwasher displays error code i10, i11, AL5, C1, beeps once, or the warning light flashes once