Washing machine is drawing in water when switched off
Resolution
If the washing machine draws in water even though it is switched off, it may be caused by dirt in the water valve.
- In many cases, it can be repaired by starting a quick-wash cycle and rinsing water through the valve.
- If the problem persists, we recommend contacting an Authorized Service Center.
To help you determine the exact nature of the problem, we recommend a visit by one of our authorized engineers to check the appliance and fix the problem.
Was this article helpful?
Related Articles
- Washing machine displays error message EA0
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Zanussi washing machine does not take detergents / water remains in the softener compartment
- The door of the washing machine cannot be opened
- Washing machine’s fluff filter is jammed, cannot be removed
- Washing Machine Inlet Hose Leaking: Causes and Step-by-Step Fix
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing Machine Installation Guide
Related Articles
- Washing machine displays error message EA0
- Removing and cleaning a washing machine detergent dispenser drawer
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- Zanussi washing machine does not take detergents / water remains in the softener compartment
- The door of the washing machine cannot be opened
- Washing machine’s fluff filter is jammed, cannot be removed
- Washing Machine Inlet Hose Leaking: Causes and Step-by-Step Fix
- Cleaning the washing machine’s rubber seal if it's dirty
- Washing Machine Installation Guide