Washing machine displays error message E90, E91, E92, E93 or E94
Resolution
Issue
- Washing machine displays error message E90, E91, E92, E93 or E94. It indicates configuration / communication problems with the electronic parts.
Applies to
- Front loader washing machine (integrated and freestanding)
- Top loader washing machine
Resolution
1. Reset the appliance.
Remove the plug from the socket, wait 30 seconds and then plug it in again.
2. Contact an Authorized Service Center.
If the above suggestion did not solve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Was this article helpful?
Related Articles
- Zanussi Washing Machine Does Not Spin – Causes and Solutions
- Washing machine’s fluff filter is jammed, cannot be removed
- Washing machine pumps continuously and produces foam
- Zanussi Washing Machine Making Unusual Noises During Draining or Spinning – Causes and Solutions
- Recently installed washing machine does not start
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- Chemical stains on laundry after washing in washing machine
- After cleaning the pump filter, the washing machine hums and does not start the wash cycle
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- How do I access the filter on my Zanussi washing machine?
Related Articles
- Zanussi Washing Machine Does Not Spin – Causes and Solutions
- Washing machine’s fluff filter is jammed, cannot be removed
- Washing machine pumps continuously and produces foam
- Zanussi Washing Machine Making Unusual Noises During Draining or Spinning – Causes and Solutions
- Recently installed washing machine does not start
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- Chemical stains on laundry after washing in washing machine
- After cleaning the pump filter, the washing machine hums and does not start the wash cycle
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- How do I access the filter on my Zanussi washing machine?