Fabric conditioner runs directly down into the washing machine's drum
Issue
- Fabric softener runs directly into the drum
- Fabric softener dispenses too soon
Applies to
- washing machines
Resolution
1. Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer.
2. Avoid closing the detergent dispenser too hard.
Gently close the detergent drawer at the start of every wash cycle.
3. Clean the dispenser drawer as described in the user manual.
Download user manual.
Tip:
- If the detergent drawer is opened at the start of a cycle, the fabric conditioner flows directly into the drum while the water is filling up.
- It can be checked only after the second time when water fills up. Up to this point, the fabric conditioner should be there.
The maximum level of fabric conditioner is indicated on the lid.
Cause
- Putting too much fabric softener into the compartment
- Pushing the detergent drawer too hard
- Dirt / residue in the dispenser drawer
Was this article helpful?
Related Articles
- Washing machine displays "CLE" - drum cleaning reminder
- Zanussi washing machine does not take detergents / water remains in the softener compartment
- Fabric conditioner does not dissolve in my washing machine
- Washing machine displays an error code, how to fix it?
- Washing machine displays error message E60
- Washing machine displays error message E40, E41 or emits 4 beeps / 4 flashes
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine’s fluff filter is jammed, cannot be removed
- Using liquid detergent / What is the flap in my washing machine dispenser for?
- Washing machine emits noises and shakes while spinning
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.