Washing machine displays error message E80 or emits 8 flashes
Issue
- Washing machine displays error code E80 (or any code beginning with E81, E82 etc.). It generally refers to a problem with the recirculation pump or User Interface of your washing machine
Applies to
- Front loader washing machine
- Top loader washing machine
- Washer-dryer
Resolution
1. Contact an Authorised Service Centre.
A service visit by one of our approved service providers is recommended.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Warning: We do not recommend using the product until the problem has been completely fixed. Unplug the product and do not plug it in again until you are certain that it is OK to do so.
Cause
- a fault with the recirculation pump or control panel on your machine
Was this article helpful?
Related Articles
- Washing machine does not spin
- Washing machine does not take detergents / water remains in the fabric softener compartment
- After cleaning the pump filter, the washing machine hums and does not start washing
- Washing machine stops in the middle of a cycle
- White clothes turn grey after washing in my washing machine / washer dryer
- Washing machine is drawing in water when switched off
- Washing machine displays an error code, how to fix it?
- How to drain a washing machine/washer dryer
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- How do I access the filter on my Zanussi washing machine?