Washing machine displays 1- minute pause
Issue
- Washing machine displays 1- minute pause
Applies to
- Washing machines
Resolution
It is normal for the washing machine to display 1-minute pause for easy care and gentle cycles.
- After a wash cycle, there is an anti-crease cycle which lasts about 30 minutes.
- During this remaining cycle, the display will show 1 minute, for example, and the OFF indicator light will illuminate.
- The laundry may be removed from the machine by pressing the START/PAUSE button.
- Turn the cycle button to off or switch off the machine via the power switch.
- The wash cycle is now complete.
If the above suggestion does not resolve the issue, contact an Authorized Service Center.
Was this article helpful?
Related Articles
- The clothes are cold after washing
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- The door of the washing machine cannot be opened
- Clothing Wash Care Symbols
- Cleaning the washing machine’s rubber seal if it's dirty
- After cleaning the pump filter, the washing machine hums and does not start the wash cycle
- Washing Machine Installation Guide
- Washing machine stops in the middle of a cycle
- Zanussi Washing Machine Leaking Water – Causes and Solutions
- Laundry is stiff or hard after washing in washing machine
Related Articles
- The clothes are cold after washing
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- The door of the washing machine cannot be opened
- Clothing Wash Care Symbols
- Cleaning the washing machine’s rubber seal if it's dirty
- After cleaning the pump filter, the washing machine hums and does not start the wash cycle
- Washing Machine Installation Guide
- Washing machine stops in the middle of a cycle
- Zanussi Washing Machine Leaking Water – Causes and Solutions
- Laundry is stiff or hard after washing in washing machine