Washing machine display does not show the wireless indicator
Resolution
Issue:
- The display does not show the wireless indicator
- Cannot connect to the appliance
Applies to:
- connected washing machine
- connected tumble dryer
Resolution:
1. Check the wireless signal.
2. Make sure that the wireless connection is on.
Refer to paragraph "Configuring the washing machine wireless connection" in "WiFi - Connectivity setup" chapter in the user manual. You can download user manual .
3. Check your home network and router.
4. Restart the router.
5. Contact your wireless service provider if there are further problems with the wireless network.
Was this article helpful?
Related Articles
- How to stop your washing machine vibrating and reduce noise / unbalanced load / reduce vibration during rinse
- Washing machine does not take detergents / water remains in the fabric softener compartment
- Washing machine blows fuses / trips RCD circuit breaker
- Washing machine displays padlock - Zanussi
- Washing machine emits humming / pumping noise
- Washing machine stops in the middle of a cycle
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine’s fluff filter is jammed, cannot be removed
- Dark or brown stains on laundry after washing in washing machine
- How do I access the filter on my Zanussi washing machine?