The lid on my top load washing machine will not close
Issue
- The lid on my top load washing machine will not close
Applies to
- Top loading Washing Machines
Resolution
One possible cause of this error is that one of the two pins has loosened in the cover hinge.
1. To correct this error, simply slide the pin back to its original position.
2. If the problem persists, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- The door of the washing machine cannot be opened
- Clothing Wash Care Symbols
- Cleaning the washing machine’s rubber seal if it's dirty
- After cleaning the pump filter, the washing machine hums and does not start the wash cycle
- Washing Machine Installation Guide
- Washing machine stops in the middle of a cycle
- Zanussi Washing Machine Leaking Water – Causes and Solutions
- Laundry is stiff or hard after washing in washing machine
- The "drum cleaning" icon appears on the washing machine display
Spare parts & Accessories
Find original spare parts and accessories for your appliance in our webshop and have them delivered directly to your door.
Related Articles
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- The door of the washing machine cannot be opened
- Clothing Wash Care Symbols
- Cleaning the washing machine’s rubber seal if it's dirty
- After cleaning the pump filter, the washing machine hums and does not start the wash cycle
- Washing Machine Installation Guide
- Washing machine stops in the middle of a cycle
- Zanussi Washing Machine Leaking Water – Causes and Solutions
- Laundry is stiff or hard after washing in washing machine
- The "drum cleaning" icon appears on the washing machine display