The door of the washing machine does not close properly
Issue
- The door of my washing machine does not close properly
- The washing machine door cannot close completely, the programme does not start
Applies to
- Front loading washing machine
Resolution
1. Make sure the appliance is correctly levelled. Loosen or tighten the feet to adjust the level.
2. Make sure that the washing machine is not overloaded.
If there are too many clothes in the washing machine (overload), the clothes may push so hard on the door that it cannot be closed completely.
Remove some clothes from the drum, close the door and restart the programme.
3. Check whether any laundry is caught between the door seal and door glass.
When clothes are trapped between the door seal and glass the door will not close properly and can cause leakage.
If the above did not solve the problem, we recommend you to book a repair.
Cause
- washing machine not levelled
- too many garments/overloading
- laundry caught between the door seal and door glass
- broken doorlock - service visit recommended
Was this article helpful?
Related Articles
- White clothes turn grey after washing in my washing machine / washer dryer
- Washing machine is drawing in water when switched off
- Washing machine displays an error code, how to fix it?
- How to drain a washing machine/washer dryer
- Washing machine does not drain, displays error code E20, E21 or C2, emits 2 beeps / 2 flashes
- How do I access the filter on my Zanussi washing machine?
- Washing machine displays error message EF0, EFo, EF3 or emits 15 beeps / 15 flashes
- Washing machine displays padlock - Zanussi
- Top loading washing machine does not have a filter/filter cannot be located
- Washing machine does not heat up and does not display an error message