Hob displays error message E7
Issue
- Hob displays error message E7
- Error code E7 in induction hob
Applies to
- induction hobs
- cookers
Resolution
Error message E7 indicates a cooling fan error in newer appliances and a power board error in appliances made before 2010.
1. To resolve the cooling fan issue:
Open the drawer under the hob and ensure nothing is blocking the fan.
Disconnect the appliance from power for at least 30 seconds. In the case of built-in appliances, it is unnecessary to disconnect the cable physically - the appliance can be disconnected using the household RCD breaker.
Reconnect it and switch it back on.
2. Contact an Authorized Service Centre
If the above advice does not resolve the problem or your appliance is from before 2010 we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Hob displays message A
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- How do I connect my electric ceramic or induction cooker to the power supply?
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays message L, the hob is locked
- Induction hob rear zone discolouration after boiling pan of water for pasta or rice
- Hob displays error message E9
- Induction hob heats unevenly