Hob displays error message E5
Resolution
Issue:
- Hob displays error message E5
Applies to:
- integrated induction hob
- freestanding cooker with induction hob
Resolution:
1. Disconnect the appliance from power for at least 30 seconds by switching the isolating switch off
switch back on and try again.
2. Contact an Authorized Service Center.
If the above advices do not resolve the problem, we recommend requesting a visit by a service engineer.
Make a note of the reported error code and quote it when you request an engineer. This will not solve your problem, but it will help our engineer identify the cause of the problem.
Cause:
- Error message E5 indicates a phase or voltage issue.
Was this article helpful?
Related Articles
- Gas Hob Ignition Won't Spark
- Only one side of the hob is operating
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays error message E9
- Hob displays error message E8 / E822
- Hob displays error message E7
- Hob displays message L, the hob is locked
- Hob displays message P
- Touch Control Induction or Ceramic hob beeps and then switches off