Hob blows/ trips fuse
Issue
- Hob/cooker continuously blows / trips the fuse
- Hob tripping power
Applies to
- Induction hobs and cookers
- Ceramic hobs and cookers
- Gas hobs and cookers
Resolution
1. Make sure that the fuse is sufficient for the power load.
Check with your electrician if you have the right fuse size and if the hob is connected to a separate fuse group.
2. Check if the appliance is correctly connected to the electrical supply.
Ensure a correct installation by calling an authorized installer.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- Hob displays message A
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- How do I connect my electric ceramic or induction cooker to the power supply?
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays message L, the hob is locked
- Induction hob rear zone discolouration after boiling pan of water for pasta or rice
- Hob displays error message E9
- Induction hob heats unevenly