Gas hob displays error message E6
Issue
- Gas hob displays message E6
- E6 comes on
- One or more burners cannot be ignited
Applies to
- Electronic Gas hobs
Resolution
1. Deactivate and activate the hob.
- E6 reappears, touch "||" and then within 3 seconds.
- When you see "0" the fault is reset
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advice do not resolve the problem, we recommend requesting a visit by a service engineer.
Was this article helpful?
Related Articles
- What Do The Gas Mark Numbers Mean / Relate To Temperatures?
- Touch Control Induction or Ceramic hob beeps and then switches off
- Induction Hob Installation Faults: Error Codes, Causes & Support
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- Hob displays error message E8 / E822
- Damage to ceramic and induction hob glass - Impact damage and stress damage (cracked glass)
- Dropped something on hob / impact damage / cracked glass / care / replace and how to organise a repair
- Hob displays message L, the hob is locked
- Hob displays error message E7
- Hob displays error message E4 / E401 / E402 / E403 / E421 / E422 / E423 / E431 / E432 / E433