An acoustic signal is heard and the gas plate switches off by itself
Issue
- An acoustic signal is heard and the gas hob switches off by itself
- An acoustic signal sounds when the hob is deactivated
Applies to
- Electronic Gas hobs
Resolution
1. Remove the object from the sensor fields.
2. Avoid touching the sensor field for more than 10 seconds.
Cause
- You spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates.
Was this article helpful?
Related Articles
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- Hob displays message L, the hob is locked
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays message F
- What Cookware Works on Induction (Complete Guide)
- Hob displays error message E9
- Hob displays error message E2
- The ignition on my gas hob keeps sparking
- Induction Hob Installation Faults: Error Codes, Causes & Support
- Induction hob heats unevenly
Related Articles
- Hob Not Working: Cannot Activate, No Display, or Interface Not Responding
- Hob displays message L, the hob is locked
- Touch Control Induction or Ceramic hob beeps and then switches off
- Hob displays message F
- What Cookware Works on Induction (Complete Guide)
- Hob displays error message E9
- Hob displays error message E2
- The ignition on my gas hob keeps sparking
- Induction Hob Installation Faults: Error Codes, Causes & Support
- Induction hob heats unevenly