After a short power failure, Demo appears in the display and my oven will not heat up - Zanussi
Appliance Issue
- After a short power failure, Demo appears in the display and my oven will not heat up
Applies to
- Zanussi Built-In Ovens
- Zanussi Compact Ovens
Resolution
To deactivate Demo Mode on your Zanussi oven
To deactivate the demo mode for the above display:
1.Turn off the oven
3.The word ‘Demo’ and number ‘1’ will flash
To deactivate Demo mode on the above display
While the oven is switched off
1. Press and hold the “+” button until the first digit blinks
If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.
Was this article helpful?
Related Articles
- Oven does not heat up
- The door of the oven does not close properly
- How to prove the dough in the oven, if it is not equipped with special programme?
- Oven displays error code with prefix F
- The time is not shown on the display when the oven is turned off
- Oven blows / trips fuses
- How to remove oven shelf supports for cleaning
- Zanussi Oven and Cooker Functions/Symbols
- Food burning prevention - Oven
- How to clean a Zanussi single oven manually, removing oven door and glass